Belshaw Brothers 616BT Operator's Manual download pdf (Page 24)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425

6 MN-1138EN 616B & 616BT TS

4 Electrical Components

This appendix explains how to test the continuity

of electrical components in your fryer. These

include the toggle switch and the thermostat.

The appendix also contains a document by the

Robertshaw Controls Company, the maker of the

thermostat we use in the 618L, 624, and 634. It

explains how to check, adjust, and recalibrate the

thermostat.

Testing the Continuity of

the Toggle Switch

WARNING

To avoid the possibility of electric shock,

disconnect the machine from the power

source before testing.

1. Disconnect the machine from the power

source.

2. Disconnect the terminal wires from the

switch.

3. Obtain a continuity tester or a volt-ohm

meter. If neither of these instruments is

available, make a continuity tester using a

battery and a bulb. See Figure 4-1.

4. Connect the wires of the continuity tester to

the switch terminals, as shown in Figure B-

1, and test the switch in the ON and OFF

positions. The switch should show

continuity only when in the ON position.

Figure 4-1. Toggle Switch Continuity Test.

battery

switch

terminals

toggle switch

1 2 ... 19 20 21 22 23 24 25 26 27

No comments

Belshaw Brothers 616BT Operator's Manual Page 24